Weld-Lathe 1210 BANCROFT standard Weld-Lathes are automatic machines that are intended for medium to high volume production volumes. Rotation drive force is applied from one side with pneumatic clamping force applied from the opposite side. A pneumatic torch shuttle moves the torch in and out for clearance when loading or unloading parts. The MODEL 1210 is typically supplied in lengths up to 20 feet between centers with a 12 inch swing. Weld-Lathes can be supplied with any arc welding process. FEATURES Fabricated bed stress relieved and machined Leveling bolts and hold down holes Programmable logic controls DC rotation drive 1000 pound load capacity Auto cycle operation Anti tie down circuit for clamping Adjustable operator console Adjustable tailstock with four inch stroke 650 pounds clamping force at 80 PSIG Weld head back rail Adjustable weld head carriage mounted on rollers with four inch stroke shuttle and hand lock release Standard air cooled torch Two 500 amp welding grounds BANCROFT wire drive 50-550 IPM or 100-1100 IPM 0.5 to 10 RPM standard rotation speed Shipping weight 2000 pounds STANDARD OPTIONS Digital rotation control Two torch configurations Optional wire feeders Hollow spindles Rotary air or water unions Six inch stroke tailstock Adjustable steady rests CUSTOM CONFIGURATIONS AVAILABLE Digital controls Multiple torch configurations Special frame configurations Machine enclosures and flash shields TIG, Plasma, and Submerged Arc applications Contour welding applications Tooling and factory run off